Skip to main content

Thermokrupp | Industrial Boiler Manufacturer

A Non IBR boiler is a steam boiler designed to fall outside the definition of a regulated boiler under the Boilers Act, 2025. Because it is built below the Act’s capacity limit, it does not need IBR certification or the annual statutory inspection that regulated boilers require, so factories can install it quickly and run it with a lighter compliance load.

As a Non IBR Boiler Manufacturer in India, Thermokrupp Boilers builds compact, automatic low pressure steam systems in Dadri, Gautam Budh Nagar (Delhi NCR). Every unit is sized to your steam load, pressure and fuel, and we confirm its regulatory status in writing before you order.

🏆 Serving Industry Since 2017 ⚙️ In-House Manufacturing 🇮🇳 Made in India – Dadri, UP ⚡ Steam in About 10–15 Minutes 🔧 Pan-India Service Support
⚡ Need instant steam without the IBR paperwork? Call +91 85109 23806 or request a quote. Response within 24 hours.

What Is a Non IBR Boiler and How Does It Work?

Many industrial processes need steam but not high-pressure, high-volume steam of the kind that falls under strict government regulation. Non IBR boilers are engineered for exactly these jobs. They provide a steady supply of low pressure steam from a compact unit that is designed to sit outside the regulated boiler category.

Most Non IBR boilers are coil type boilers. Water is pumped through a tightly wound steel coil that is heated directly by the burner flame and flue gas. Because only a small amount of water is inside the coil at any moment, steam is produced within minutes of start-up, and the stored energy in the vessel is low.

Our packaged units are fully automatic. The feed water pump, burner and control panel work together to track steam demand and adjust firing to hold pressure and keep fuel use down. You can read a plain-English comparison in our guide to IBR vs Non IBR boilers.

Key Technical Specifications

Here are the standard specifications for our Non IBR steam boilers. Exact figures vary by model, so we confirm them in your quotation.

SpecificationValue / Range
Steam capacityUp to 1,000 kg/hr (selected to your peak demand)
Working pressureUp to about 7 kg/cm², depending on the model
Design water capacityStated per model in your quotation
Fuel optionsGas, diesel, light diesel oil (LDO), and solid fuels such as wood, coal and biomass briquette. LPG on request
Thermal efficiencyAbout 88% (varies with fuel type and load)
FootprintCompact, skid-mounted design
Start-up timeTypically 10 to 15 minutes from cold
Regulatory statusConfirmed in writing for each model

We can customise the burner and fuel firing system to match the fuel available at your plant and your running-cost targets.

Types of Non IBR Boilers We Build

Coil Type Boilers

The fastest steam and the most compact footprint. See our coil type boiler manufacturer page.

Baby Boilers

Small steam boilers for laundries, labs and small food units. See our baby boiler manufacturer page.

Electric Boilers

No chimney, no fuel storage, zero on-site emissions. See our electric boilers.

Oil & Gas Fired Boilers

Diesel, LDO and gas-fired steam systems. See our oil and gas fired boilers.

Applications by Industry

Our Non IBR boilers supply dependable low pressure steam across many sectors:

  • Textile industry: steam for dyeing, bleaching, fabric pressing and finishing, with a steady supply as load changes.
  • Food processing: clean, consistent heat for cooking, sterilisation and drying while keeping hygiene standards.
  • Chemical manufacturing: rapid, low-pressure heating for jacketed vessels and reactors.
  • Pharmaceuticals: steam for autoclaves, sterilisation equipment and formulation processes.
  • Packaging and paper: immediate steam for corrugation machines and drying rollers.

Advantages of Choosing a Non IBR Boiler

For small and medium process plants, a Non IBR system can be a better fit than a standard IBR-certified boiler.

✅ Lighter Compliance

No IBR certification or annual statutory inspection for a boiler designed outside the Act’s definition, so installation and commissioning move faster.

✅ Saves Floor Space

A compact, skid-mounted design needs minimal civil work and is close to plug-and-play on your factory floor.

✅ Faster Production Start

Steam in about 10 to 15 minutes means less waiting for warm-up and less wasted fuel.

✅ Simple, Automatic Operation

Automatic controls and safety devices make daily running straightforward. We train your staff on safe operation.

Non IBR Boiler vs IBR Boiler

Non IBR boilerIBR (regulated) boiler
Legal statusDesigned below the Boilers Act, 2025 limitsFalls under the Act
Certification & inspectionIBR certification not required for the model (confirmed in writing)Registration, certified design and annual inspection
Typical sizeSmall to mid steam loadsMid to large, continuous loads
InstallationFaster, fewer approvalsLonger, with statutory approvals
Best forLow pressure process steamHigh capacity or high pressure steam

If you need larger or higher-pressure steam, see our steam boiler manufacturer page and our packaged boilers.

Questions to Ask Before You Buy a Non IBR Boiler

  1. What is the design water capacity and working pressure, and is the model regulated under the Boilers Act, 2025? Get this in writing.
  2. What is the rated steam output (kg/hr) at my working pressure?
  3. What is the tested thermal efficiency on my fuel?
  4. Which safety devices come as standard (flame safeguard, low-water cut-off, safety valve)?
  5. What does the quote include: chimney, feed water pump, water softener, piping and commissioning?
  6. What does the annual maintenance contract (AMC) cover?

For a neutral benchmark on efficiency, see the Bureau of Energy Efficiency. Our Non IBR boiler buying guide and the guide to baby boiler price, capacity and fuel go into more detail, and you can compare us with others in our guide to boiler manufacturers in India.

Why Choose Thermokrupp Boilers as Your Non IBR Boiler Manufacturer?

We don’t just manufacture boilers; we provide complete thermal solutions. Our custom engineering adapts the boiler mounting, burner selection and control panel to your exact factory conditions. We also offer erection and commissioning, boiler AMC and service support across India, so one team stays responsible from order to running plant. Learn more about Thermokrupp.

If your steam needs grow, we also build steam boilers, thermic fluid heaters and hot water generators to scale with you.

Serving Delhi NCR and all of India. Our factory at Bisnoli, Dadri, Gautam Budh Nagar is close to Noida, Greater Noida and Ghaziabad. For plants in the region we can visit your site, check your steam load and layout, and commission the boiler ourselves.

Frequently Asked Questions (FAQs)

Does a Non IBR boiler need IBR certification?
A boiler designed to fall outside the Boilers Act, 2025 definition (a steam vessel of 25 litres or more capacity at 1 kg/cm² or more pressure) does not need IBR certification or the annual statutory inspection. Because the legal test depends on each model’s design, we confirm the status of your specific boiler in writing.
What is the maximum pressure of a Non IBR boiler?
There is no single Non IBR pressure figure, because the legal line is about design capacity and pressure together. Our compact designs commonly operate at working pressures up to about 7 kg/cm², depending on the model. Always confirm the design capacity and working pressure of the specific boiler you are buying.
Can a Non IBR boiler run on solid fuels?
Yes. Our Non IBR boilers can be engineered to run on gas, diesel, LDO and solid fuels including wood, coal and biomass briquettes. This helps factories optimise running cost based on local fuel availability.
How quickly does a Non IBR boiler generate steam?
A Non IBR coil type boiler typically generates usable steam from a cold start within about 10 to 15 minutes, depending on the model. This fast response comes from the low water content and efficient heat transfer of the design.
Do I need a certified operator to run a Non IBR boiler?
It depends on whether your specific boiler falls under the Boilers Act, 2025. A boiler designed outside the Act’s definition is generally not regulated as a boiler, but any steam equipment should be run by trained staff. We confirm the status of your model and train your team on safe operation.
What is the difference between an IBR and a Non IBR boiler?
An IBR boiler is a regulated boiler that needs certified design, registration and annual inspection. A Non IBR boiler is designed below the Boilers Act, 2025 limits, so it does not need those, which makes installation faster. Non IBR boilers suit small to mid steam loads, while IBR boilers suit larger or higher-pressure duties.

Ready to Upgrade Your Plant’s Steam System?

Contact Thermokrupp today for the right Non IBR boiler for your plant. Our engineers will size the unit for your application and send a detailed quotation within 24 hours.

📞 Call +91 85109 23806 📞 Call +91 99119 35013 ✉️ Request a Quote

📍 Factory: Kh No -12, Bisnoli, Tehsil – Dadri, Gautam Budh Nagar, UP 203207
✉️ sales@thermokruppboilers.com